Click image to view full size image
Cnc L-shaped 3d welding positioner for welding robot center
The main features are as follows:1.The servo motor shaft and the precision reducer shaft hole adopt the direct connection structure, the transmission precision is high.
2.Special non backlash meshing structure is adopted for the rotary pinion, the turning pinion and the supporting outer tooth.
3.Use heavy precision rotary support, high bearing capacity, small side gap, and has a large amount of design margin, so as to reduce the after the axis jitter due to work piece turning, to ensure the accuracy of the position
L positioner parameter
| Model | LHB-5 | LHB-10 | LHB-20 |
| Name | 500type positioner | 1000type positioner | 2000type positioner |
| Max loading weight(kg) | ≤500 | ≤1000 | ≤2000 |
| Rotating speed(r/min) | Servo regulation,0-3 | ||
| Turning speed(r/min) | Servo regulation,0-3 | ||
| Rotated angle(0) | 360°unlimited rotary | ||
| Turning angle(0) | ±90 | ||
| Rotating power(kw) | 0.75 | 2 | 3 |
| Turning power(kw) | 0.75 | 2 | 3 |
| Repeatability set accuracy(mm) | Less than ±0.5 | ||
| Work table diameter(mm) | ¢800 | ¢1000 | ¢1400 |
Certification
Service
Warranty: 12 months from the date of Bill of Lading.
The Seller shall bear responsibility for the entire machineries normally working during 12 months from the date of Bill of Lading. During warranty period, if are damages and disorders of equipment due to machine quality, The Seller shall be responsible for replacement of the defective parts with new parts. The warranty shall also include performance functions as defined in the offer. In the case that there is any defect The Buyer shall inform The Seller in writing and photos of the broken parts. The Seller will assist and deal with such damages within 15 days from receipt of The Buyer's above information.
The Seller doesn't guarantee the spare parts which are easily worn out / damaged. The Seller deems it his responsibility to furnish The Buyer these spare parts at prices reasonable or agreed.
The Seller doesn't guarantee equipment in case faults caused by operators' improper operation or electric source's breakdown.
Service condition:
1) When Sellers send engineer to Buyer's place for Installation, Commissioning and training for the machine in this contract in Buyer's place, Buyer shall undertake all the relative fees like, all tickets, accommodation for Seller's engineers.
2) Seller shall, within one week of receiving the above information, provide the required and qualified personnel to undertake supervision of installation, commissioning and training.
3) If the Buyer needs the service after sales from Seller, then Buyer shall undertake all the relative fees, like Round Tickets, Accommodation, Internal and international transportation, Labour cost of engineers etc.
4) When the Seller's engineer carries out the services in Buyer's place, Buyer shall arrange a Translator that can speak Chinese for Seller's engineer.
5) Labour cost for engineers: 80.00 USD per person, per day.